FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
c. While turning the fuel injector left and right, install it onto the fuel delivery pipe.
d. Position the fuel injector connector facing outward.
2. INSTALL FUEL DELIVERY PIPE SUB-ASSEMBLY
a. Place the fuel delivery pipe together with the 6 fuel injectors on the intake manifold.
b. Provisionally install the 6 bolts, which are used to hold the fuel delivery pipe, onto the intake manifold.
c. Check that the fuel injectors rotate smoothly.
HINT: If the fuel injectors do not rotate smoothly, replace the O-ring.
d. Position each fuel injector connector facing outward.
e. Tighten the 6 bolts, which are used to hold the fuel delivery pipe, to the intake manifold.
Torque: 15 N.m (153 kgf.cm, 11 ft.lbf)
f.
Connect the 6 fuel injector connectors.
3. CONNECT NO. 2 FUEL PIPE SUB-ASSEMBLY
a. Push the tube connector into the pipe until the tube connector makes a "click" sound.
NOTE:
-
Check if there is any damage or foreign objects on the connected part of the fuel pipe.
-
After connecting, check that the pipe and connector are securely connected by pulling them.
b. Install the fuel pipe clamp.
4. CONNECT NO. 1 FUEL PIPE SUB-ASSEMBLY
a. Push the tube connector into the pipe until the tube connector makes a "click" sound.
NOTE:
-
Check if there is any damage or foreign matter on the connected part of the fuel pipe.
-
After connecting, check that the pipe and connector are securely connected by pulling them.
b. Install the fuel pipe clamp.
5. INSTALL INTAKE AIR SURGE TANK
a. Install a new gasket onto the intake air surge tank.