FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
f.
Remove the 2 bolts.
g. Disconnect the air cleaner hose and remove the air cleaner.
5. REMOVE THROTTLE WITH MOTOR BODY ASSEMBLY
a. Disconnect the No. 5 water by-pass hose.
b. Disconnect the No. 4 water by-pass hose.
c. Disconnect the throttle motor connector.
d. Remove the 4 bolts, then remove the throttle w/ motor body and gasket.
e. Remove the No. 5 water by-pass hose.
f.
Remove the No. 4 water by-passe hose.
INSTALLATION
1. INSTALL THROTTLE WITH MOTOR BODY ASSEMBLY
a. Connect the No. 4 water by-pass hose to the throttle body.
b. Connect the No. 5 water by-passe hose to the throttle body.