FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Fuel Pump Relay: Testing and Inspection
Fuel Pump Relay
ON-VEHICLE INSPECTION
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FUEL PUMP RELAY
a. Remove the relay block cover upper.
b. Remove the fuel pump relay.
3. INSPECT FUEL PUMP RELAY
a. Check the resistance.
1. Using an ohmmeter, measure the resistance between the terminals.
If the result is not as specified, replace the fuel pump relay.
4. INSTALL FUEL PUMP RELAY