FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
If the result is not as specified, check the fuel pump and fuel injector.
p. Disconnect the intelligent tester from the DLC3.
q. Disconnect the cable from the battery negative terminal.
r.
Remove SST and the fuel tube connector while being careful to prevent gasoline splashes.
s. Connect the fuel tube.
3. CHECK FOR FUEL LEAKAGE
a. Connect the intelligent tester to the DLC3.
b. Turn the ignition switch ON.
NOTE: Do not start the engine.
c. Turn the intelligent tester ON.
d. Select the following menu items: DIAGNOSIS / ENHANCED OBD II / ACTIVE TEST / FUEL PUMP / SPD / ON.
e. Check that there is no leakage from the fuel system.