FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Impact Sensor: Service and Repair
Side Airbag Sensor
Side Airbag Sensor
SIDE AIRBAG SENSOR
REMOVAL
HINT:
-
Use the same procedures for the RH side and LH side.
-
The procedures described below are for the LH side.
1. PRECAUTION
CAUTION: Read PRECAUTION thoroughly before servicing, (Refer to Restraint Systems; Service Precautions).
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
3. REMOVE FRONT DOOR SCUFF PLATE LH
4. REMOVE ACCESS DOOR SCUFF PLATE LH
5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
a. Remove the front door opening trim weatherstrip LH to the extent necessary to remove the side airbag sensor LH.