FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1311015.png)
b. for LH Side:
1. Align the jam hole in the anchor plate of the rear seat inner belt with the stud bolt of the body and provisionally install the anchor plate.
2. Install the anchor plate of the rear center seat inner belt with the bolt.
Torque: 42 N.m (430 kgf.cm, 31 ft.lbf)
NOTE: Do not place the anchor plate over the convex areas of the rear seat inner belt.
3. Install the buckle into the rear seatback band.
4. Install the rear seat cushion.
Rear Seat Outer Belt Assembly
