FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-127003.png)
b. Connect the connector, connector clamp and access panel lock control cable.
2. INSTALL REAR DOOR TRIM BOARD SUBASSEMBLY
3. INSTALL NO. 1 CUP HOLDER
4. INSTALL REAR DOOR INSIDE HANDLE SUBASSEMBLY
5. INSTALL LAP BELT OUTER ANCHOR COVER
6. INSTALL ACCESS PANEL REAR WEATHERSTRIP
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
