FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-149003.png)
Torque: 12 N.m (122 kgf.cm, 9 ft.lbf)
b. Connect the connector, harness clamp and access panel lock control cable.
2. INSTALL CENTER PILLAR UPPER GARNISH
3. INSTALL REAR DOOR TRIM BOARD SUBASSEMBLY
4. INSTALL NO. 1 CUP HOLDER
5. INSTALL REAR DOOR INSIDE HANDLE SUBASSEMBLY
6. INSTALL LAP BELT OUTER ANCHOR COVER
7. INSTALL ACCESS PANEL REAR WEATHERSTRIP
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
