FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
2. REMOVE IGNITION SWITCH ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 screws, then remove the ignition switch.
INSTALLATION
1. INSTALL IGNITION SWITCH ASSEMBLY
a. Connect the connector.
b. Install the ignition switch with the 2 screws.
2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)