FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-232003.png)
a new one.
-
When installing the occupant classification ECU, make sure that the SRS wiring does not interfere with any other parts and that it is not
pinched between other parts.
3. INSTALL FRONT SEAT ASSEMBLY RH
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)
5. PERFORM INITIALIZATION
a. Perform initialization.
HINT: Some systems need initialization when the cable has been disconnected from the negative battery terminal.
6. INSPECT SRS WARNING LIGHT
a. Inspect the SRS warning light.
