FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY
a. Engage the 2 claws and install the power window regulator switch.
2. INSTALL FRONT ARMREST BASE UPPER PANEL
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N.m (40 kgf.cm, 35 in.lbf)