FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1063003.png)
f.
Turn SST 1-B, and remove SST 1-A and B.
g. Remove the pulley nut and pulley.
2. REMOVE GENERATOR REAR END COVER
a. Place the generator on the pulley.
b. Remove the 3 nuts and the rear end cover.
3. REMOVE TERMINAL INSULATOR
4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY
a. Remove the 2 screws and the brush holder.
