FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1079004.png)
c. Using a screwdriver, install 4 brushes.
d. Install the commutator end frame with the 2 screws.
Torque: 3.8 N.m (39 kgf.cm, 34 in.lbf)
3. INSTALL MAGNET STARTER SWITCH ASSEMBLY
a. Apply grease to the steel ball, and install it onto the clutch shaft hole.
b. Apply grease to parts (2) to (5), and install all the parts below onto the starter drive housing.
