FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
2. INSTALL POWER STEERING RACK
(a)
Apply grease onto the rack teeth ends.
(b) Install SST onto the steering rack.
SST 09631-00350
HINT: If necessary, scrape the burrs off the rack teeth end and burnish.
(c)
Coat SST and the power piston oil seal with power steering fluid.
(d) Install the steering rack onto the rack housing.
(e)
Remove SST.
(f)
Coat SST with power steering fluid.
SST 09631-00350
(g) Install SST onto the steering rack opposite end.
(h) Coat the lip of a new oil seal with power steering fluid. Using SST, install the oil seal onto the steering rack.
NOTICE:
^
Slide SST and the oil seal straight without tilting them.
^
Install the oil seal facing in the correct direction.
^
Be careful not to damage the lip of the oil seal.
(i)
Remove SST.