FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
1. TEMPORARILY TIGHTEN FRONT LOWER SUSPENSION ARM
(a)
Align the matchmarks on the No. 2 camber adjust cam and toe adjust cam.
(b) Temporarily tighten the bolt and the nut.
(c)
Install the lower ball joint attachment, a new nut and a new cotter pin.
Torque: 140 N*m (1,428 kgf*cm, 103 ft.*lbf)
(d) Install the lower ball joint attachment with the 2 bolts.
Torque: 160 N*m (1,631 kgf*cm, 118 ft.*lbf)
2. TEMPORARILY TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
(a)
Install the front shock absorber with coil spring, bolt and washer, and temporarily tighten the nut.
3. INSTALL FRONT WHEEL
Torque: 112 N*m (1,137 kgf*cm, 82 ft.*lbf)
4. STABILIZE SUSPENSION
(a)
Jack down the vehicle.
(b) Bounce the vehicle up and down several times to stabilize the suspension.