FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1180002.png)
(b) Remove the bolt.
(c)
Remove the bolt and nut and remove the lateral control rod.
HINT: While fixing the nut, turn and remove the bolt.
INSTALLATION
1. TEMPORARILY TIGHTEN REAR LATERAL CONTROL ROD
(a)
Install the lateral control rod and provisionally tighten the bolt.
(b) Provisionally tighten the bolt and nut.
2. STABILIZE SUSPENSION
(a)
Jack down the vehicle.
(b) Bounce the vehicle up and down several times to stabilize the suspension.
