FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
REASSEMBLY
1. INSTALL FRONT AXLE HUB OIL SEAL
(a)
Using a brass bar and a hammer, install a new oil seal.
NOTICE: Do not damage the oil seal.
2. INSTALL FRONT AXLE WITH ABS ROTOR BEARING ASSEMBLY
(a)
Using SST and a press, install a new bearing onto the axle hub.
SST 09649-17010
3. INSTALL FRONT WHEEL ADJUSTING NUT (for 2WD)
(a)
Using SST, install a new adjusting nut.
SST 09318-12010
Torque: 275 N*m (2,804 kgf*cm, 203 ft.*lbf)
4. INSTALL FRONT AXLE HUB
(a)
Apply MP grease to a new O-ring.
(b) Install the new O-ring onto the axle hub.