FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
Fluid - A/T: Service and Repair
AUTOMATIC TRANSMISSION FLUID
1. BEFORE REFILL TRANSMISSION
-
This transmission requires Toyota Genuine ATF WS transmission fluid.
-
After servicing the transmission, you must refill the transmission with the correct amount of fluid
-
Maintain the vehicle in a horizontal position while adjusting fluid level.
-
If the transmission pan, drain plug, valve body or torque converter is replaced, proceed to the "Transmission Pan Fill" procedures.
-
If the transmission hose or output shaft oil seal is replaced, remove the fill plug and proceed to the "Transmission Fill" procedures.
-
If the entire transmission is replaced, proceed to the "Fluid Circulation" procedures.
New transmissions are already filled with transmission fluid.
2. TRANSMISSION PAN FILL
(a) Remove the refill plug and overflow plug.
(b) Fill the transmission through the refill hole until fluid begins to trickle out of the overflow tube.
(c) Reinstall the overflow plug.