FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(a)
Measure the resistance of the sensor.
Standard resistance
INSTALLATION
1. INSTALL TRANSMISSION REVOLUTION SENSOR
(a)
Coat 2 new O-rings with ATF and install one onto each transmission revolution sensor.
(b) Install the 2 transmission revolution sensors with the 2 bolts.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(c)
Connect the 2 transmission revolution sensor connectors.