FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
1. INSTALL TRANSMISSION WIRE
(a)
Install the transmission wire with the bolt.
Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
(b) Connect the transmission wire connector.
2. CONNECT TRANSMISSION WIRE
(a)
Connect the 7 connectors to the solenoid valves.
(b) Install the 2 clamps with the 2 bolts.
Torque:
10 N*m (100 kgf*cm, 7 ft.*lbf) for bolt A
11 N*m (112 kgf*cm, 8 ft.*lbf) for bolt B
Bolt length:
12 mm (0.47 in.) for bolt A
36 mm (1.42 in.) for bolt B
(c)
Connect the ATF temperature sensor.
3. INSTALL VALVE BODY OIL STRAINER ASSEMBLY
(a)
Install a new O-ring and the oil strainer with the 4 bolts.
Torque: 10 N*m (100 kgf*cm, 7 ft.*lbf)