FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
INSTALLATION
1. INSTALL CLUTCH ACCUMULATOR ASSEMBLY
(a)
Install the clutch accumulator with the 3 bolts.
Torque: 12 N*m (120 kgf*cm, 8.7 ft.*lbf)
(b) Using SST, tighten the flexible hose tube.
SST 09023-00101
Torque: 15 N*m (155 kgf*cm, 11 ft.*lbf)
(c)
Install the clutch line bracket with the nut
Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf)
(d) Using SST, connect the flexible hose tube.
SST 09023-00101
Torque: 15 N*m (153 kgf*cm, 11 ft.*lbf)
(e)
Install the clutch line bracket with the bolt.
Torque: 12 N*m (120 kgf*cm, 8.7 ft.*lbf)