FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-852004.png)
(c)
Remove the nut and clutch start switch from the clutch pedal support.
(d) Remove the clip and the pin and separate the push rod clevis from the clutch pedal.
(e)
Remove the 2 bolts, then remove the clutch master cylinder.
INSTALLATION
1. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
(a)
Install the clutch master cylinder with the 2 bolts.
Torque: 12 N*m (122 kgf*cm, 8.9 ft.*lbf)
