FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(b) Install the clutch pedal spring holder.
10. INSTALL CLUTCH PEDAL SUB-ASSEMBLY
(a)
Install the clutch pedal onto the clutch pedal support with the bolt and nut.
Torque: 34 N*m (347 kgf*cm, 25 ft.*lbf)
HINT: Install the bolt from the left side of the vehicle.
11. INSTALL TURN OVER SPRING SEAT COMPRESSION SPRING
(a)
Apply MP grease to the contact surfaces of the spring holder, clutch pedal and spring.
(b) Install the spring onto the clutch pedal and spring holder.
12. INSTALL CLUTCH MASTER CYLINDER ASSEMBLY
13. BLEED CLUTCH PIPE LINE
14. INSPECT AND ADJUST CLUTCH PEDAL SUB-ASSEMBLY
15. CHECK FOR CLUTCH FLUID LEAKAGE
16. CHECK FLUID LEVEL IN RESERVOIR