FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-940001.png)
Speedometer Gear: Service and Repair
SPEEDOMETER DRIVEN GEAR
COMPONENTS
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE VEHICLE SPEED SENSOR WITH SPEEDOMETER DRIVEN GEAR SUB-ASSEMBLY
(a)
Disconnect the sensor connector.
(b) Remove the bolt and sensor with driven gear.
