FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1671002.png)
a. Disengage the 3 claws and clip and remove the front armrest base upper panel.
b. Disconnect the connector.
3. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Remove the 3 screws and the power window regulator master switch.
INSTALLATION
1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
a. Install the power window regulator master switch with the 3 screws.
2. INSTALL FRONT ARMREST BASE UPPER PANEL
a. Connect the connector.
b. Engage the 3 claws and clip and install the front armrest base upper panel.
