FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
a. Using a screwdriver with its tip wrapped in protective tape, remove the 2 stop rings and back window support.
NOTICE:
-
Do not touch the rod of the back window support with gloves, to avoid fibers from adhering.
-
When foreign matter adheres to the rod, it prevents the rod from moving smoothly and reduces its holding power.
HINT: Support the back door glass by hand while removing the back window support.
INSTALLATION
1. INSTALL BACK WINDOW SUPPORT
a. Install the 2 stop rings onto the back window support.
b. Install the back window support.
2. INSTALL BACK DOOR TRIM COVER