FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-1708003.png)
2. REMOVE WINDSHIELD WIPER ARM COVER
a. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the 3 front wiper arm cover.
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH
a. Operate the wiper, then stop the windshield wiper motor in the automatic stop position.
b. Remove the nut and front wiper arm.
4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH (CENTER SIDE)
HINT: Use the same procedure as for the LH side.
5. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH
HINT: Use the same procedure as for the LH side.
6. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY
