Highlander 2WD L4-2.4L (2AZ-FE) (2001)
/Page-1295007.png)
1.
REMOVE REAR DOOR CHILD PROTECTION LOCK COVER.
(a)
Disengage the 4 claws and remove the protector cover.
2.
INSTALL SUPPLIED SPACER.
(a)
Install protective tape on the door panel.
(b)
Set the lock lever into the locked position.
(c)
Install the provided spacer over the child protection lock lever as shown in the illustration.
NOTE:
The supplied spacer may not fit flush against the door panel. The supplied spacer should bottom out on the lever.
