Highlander 2WD L4-2.4L (2AZ-FE) (2001)
/Page-1309002.png)
A.
The weatherstrip (P/N 53395-48010) will have 7 clips.
B.
Remove the two clips from the weatherstrip shown in Figure 2.
C.
Line up all the clips on the weatherstrip with their corresponding holes on the hood.
D.
Press the clips through the weatherstrip and into each hole on the hood.
E.
Use the two screws removed earlier in Step 1, and install them at their original locations, through the weatherstrip, through the hood
protector, and into the holes in the hood shown in Figure 3.
