Highlander 2WD L4-2.4L (2AZ-FE) (2001)
a. Remove the screw.
b. Using a screwdriver, remove the deck trim box.
HINT: Tape the screwdriver tip before use.
23. REMOVE DECK SIDE TRIM BOX LH
24. REMOVE REAR FLOOR FINISH PLATE
a. Using a screwdriver, remove the rear floor finish plate.
HINT: Tape the screwdriver tip before use.
25. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH
a. Remove the 6 bolts.
b. Remove the bolt and rear seat outer belt floor anchor.
c. Remove the clip.
d. Using a screwdriver, remove the deck trim side panel.
HINT: Tape the screwdriver tip before use.
e. Employ the same manner described above to the other side.
26. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH
27. REMOVE QUARTER PILLAR GARNISH RH