Highlander 2WD L4-2.4L (2AZ-FE) (2001)
1.
Tape felt washer to locations # 1, 2 3, 4 & 5 of the Sliding Roof Glass Sub-Assembly.
Repeat for opposite side
Felt size:
Length: 15 mm
Width: 25 mm
Thickness: 0.5 mm
Hole diameter: 8 mm
Slit length: 15 mm
2.
Tape 2 pieces of felt to location # 6 of the Sliding Roof Glass Sub-Assembly.
Repeat for opposite side.
Felt Size:
Length: 5 mm
Width: 25 mm
Thickness: 0.5 mm
3.
Tape 1 piece of felt washer to locations # 7 and # 8 of the Sliding Roof Glass Sub-Assembly.
Felt size:
Length: 10 mm
Width: 20 mm
Thickness: 0.5 mm
Slit length: 15 mm
4.
Tape 1 piece of felt washer to location # 9 of the Sliding Roof Glass Sub-Assembly.
Repeat for opposite side.
Felt size:
Length: 10 mm
Width: 20 mm
Thickness: 0.5 mm