Highlander 2WD L4-2.4L (2AZ-FE) (2001)
a. Using SST, disconnect the 6 brake lines from the actuator.
SST 09023-00100
b. Use tags or make a memo to identify the place to reconnect.
c. Using SST, disconnect the brake lines from the master cylinder, then remove the 2 brake lines.
SST 09023-00100
d. Disconnect the brake actuator connector.
e. Remove the 3 nuts and brake actuator with bracket.
4. REMOVE BRAKE ACTUATOR ASSY [44510/98-85]
a. Remove the 2 nuts and brake actuator from the bracket.
b. Remove the 2 holders and 3 cushions from the brake actuator.
5. REMOVE BRAKE ACTUATOR BRACKET ASSY [44590/98-85]