Highlander 2WD L4-2.4L (2AZ-FE) (2001)
Parking Brake Pedal: Service and Repair
SUB-ASSY OVERHAUL
1. REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSY LOWER [55045/98-102]
2. REMOVE INSTRUMENT PNL INSERT SUB-ASSY LWR LH [55406C/98-102]
3. REMOVE FRONT DOOR SCUFF PLATE LH [67914/98-115]
4. REMOVE COWL SIDE TRIM SUB-ASSY LH [62112A/98-115]
5. REMOVE SKID CONTROL BUZZER ASSY (w/ VSC) [86652A/98-170]
a. Disconnect the skid control buzzer connector.
b. Remove the skid control buzzer assembly
6. REMOVE SKID CONTROL ECU ASSY [89540/98-170]
a. Remove the 2 nuts and disconnect the skid control ECU from the body.
b. Disconnect the skid control ECU connectors, and remove the skid control ECU.
7. SEPARATE PARKING BRAKE CABLE ASSY NO.1 [46410/98-78]
a. Release the parking brake pedal.
b. Remove the clip and disconnect the parking brake cable assembly No. 1 from the parking brake pedal assembly
8. REMOVE PARKING BRAKE CONTROL PEDAL ASSY [46200/98-78]
a. Disconnect the parking brake switch connector and harness clamp.
b. Remove the 3 nuts and parking brake control pedal assembly
9. REMOVE PARKING BRAKE SWITCH ASSY [84550]
a. Remove the screw and parking brake switch assembly
10. REMOVE TENSION SPRING [46201B/98-78]