Highlander 2WD L4-2.4L (2AZ-FE) (2001)
/Page-395008.png)
29. REMOVE WIRING AIR INDICATOR HARNESS SUB-ASSEMBLY NO.2
a. Remove the wiring air indicator harness sub-assembly No.2 from the blower motor control.
30. REMOVE COOLER EXPANSION VALVE
a. Using a hexagon wrench 4 mm, remove the 2 hexagon bolts and cooler expansion valve.
b. Remove the 2 O-rings from the air conditioner tube assembly.
31. REMOVE COOLER EVAPORATOR SUB-ASSEMBLY NO.1
a. Remove the 11 screws and disassemble the air conditioner radiator assembly.
b. Remove the cooler evaporator sub-assembly No.1 from the air conditioner radiator assembly.
c. Remove the 2 O-rings from the cooler evaporator sub-assembly No.1.
32. INSTALL COOLER EVAPORATOR SUB-ASSEMBLY NO.1
a. Install the cooler evaporator No.1 to the air conditioner radiator assembly.
b. Reassemble the air conditioner radiator assembly with 11 screws.
