Highlander 2WD L4-2.4L (2AZ-FE) (2001)
/Page-407002.png)
d. Connect the crankshaft position sensor wire harness clamp.
6. INSTALL WATER PUMP PULLEY [16173 / 98-19]
a. Using SST, install the pump pulley with 4 bolts.
SST 09960-10010 (09962-01000, 09963-00700)
Torque: 26 Nm (265 kgf-cm, 19 ft. lbs.)
7. ADD COOLANT
8. INSPECT COOLANT LEAKS
