Highlander 2WD L4-2.4L (2AZ-FE) (2001)
7. INSTALL OIL PRESSURE SWITCH
a. Remove the oil pressure gauge.
b. Apply adhesive to 2 or 3 threads of the oil pressure switch.
Adhesive: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
c. Install the oil pressure switch.
Torque: 15 Nm (152 kgf-cm, 11 ft. lbs.)
d. Connect the oil pressure switch connector.
8. START ENGINE AND CHECK FOR LEAKS