Highlander 2WD L4-2.4L (2AZ-FE) (2001)
42. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING BRACKET [12315A / 98-10]
a. Install the engine mounting bracket RH with the 3 bolts.
Torque: 52 Nm (531 kgf-cm, 38 ft. lbs.)
43. INSTALL TRANSVERSE ENGINE ENGINE MOUNTING INSULATOR [12362 / 98-10]
a. Raise the engine and install the engine mounting insulator RH.
b. Install the engine mounting insulator RH with the 4 nuts.
Torque:
Bolt A 95 Nm (969 kgf-cm, 70 ft. lbs.)
Bolt B 87 Nm (888 kgf-cm, 64 ft. lbs.)
c. Install the bolt and disconnect the steering gear return hose cramp from the frame.
Torque: 8.0 Nm (80 kgf-cm, 69 inch lbs.)
d. Install the engine mounting insulator RR with the 2 nuts. (4WD DRIVE TYPE)
Torque: 52 Nm (530 kgf-cm, 38 inch lbs.)