Highlander 2WD L4-2.4L (2AZ-FE) (2001)
Wiring Harness Connector
E: Indicates the wiring harness and wiring harness connector. The wiring harness with male terminal is shown with arrows. Outside numerals are pin
numbers.
The first letter of the code for each wiring harness and wiring harness connector(s) indicates the component's location, e.g, "E" for the Engine
Compartment, "I" for the Instrument Panel and Surrounding area, and "B" for the Body and Surrounding area.
When more than one code has the first and second letters in common, followed by numbers (e.g, IH1, IH2), this indicates the same type of wiring
harness and wiring harness connector.
F: Represents a part (all parts are shown in sky blue). The code is the same as the code used in parts position.
G: Junction Block (The number in the circle is the J/B No. and the connector code is shown beside it). Junction Blocks are shaded to clearly separate
them from other parts.
H: When 2 parts both use one connector in common, the parts connector name used in the wire routing section is shown in square brackets [ ].
Wiring Color
I: Indicates the wiring color.
Wire colors are indicated by an alphabetical code.
B = Black
W = White
BR = Brown
L = Blue
V = Violet
SB = Sky Blue
R = Red
G = Green
LG = Light Green
P = Pink
Y = Yellow
GR= Gray
O = Orange
The first letter indicates the basic wire color and the second letter indicates the color of the stripe.
Splice Point
J: Indicates a wiring Splice Point (Codes are "E" for the Engine Room, "I" for the Instrument Panel, and "B" for the Body).
The Location of splice Point 15 is indicated by the shaded section.