Highlander 2WD L4-2.4L (2AZ-FE) (2001)
Vehicle Speed Sensor: Service and Repair
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY [17700]
3. REMOVE AIR CLEANER HOSE NO. 1 [17881]
4. REMOVE SPEED SENSOR (NT SENSOR) [89411F]
a. Disconnect the connector.
b. Remove the bolt and speed sensor.
5. REMOVE SPEED SENSOR (NC SENSOR) [89411F]
a. Disconnect the connector.
b. Remove the bolt and speed sensor.
6. INSTALL SPEED SENSOR (NC SENSOR) [89411F]
a. Coat O-ring with ATF
b. Install the speed sensor with the bolt.
Torque: 11.3 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure of the manufacturer's name.
c. Connect the connector.