Highlander 2WD L4-2.4L (2AZ-FE) (2001)
Transmission Speed Sensor: Service and Repair
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY [17700 / 98-30]
3. REMOVE AIR CLEANER HOSE NO. 1 [17881 / 98-30]
4. REMOVE TRANSMISSION REVOLUTION SENSOR (NT SENSOR) [89413E / 98-53]
a. Disconnect the connector.
b. Remove the bolt and transmission revolution sensor.
5. REMOVE TRANSMISSION REVOLUTION SENSOR (NC SENSOR) [89413E / 98-53]
a. Disconnect the connector.
b. Remove the bolt and transmission revolution sensor.
6. INSTALL TRANSMISSION REVOLUTION SENSOR (NC SENSOR) [89413E / 98-53]
a. Coat O-ring with ATF.
b. Install the transmission revolution sensor with the bolt.
Torque: 11.3 Nm (115 kgf-cm, 8 ft. lbs.)
HINT: Make sure of the manufacturer's name.
c. Connect the connector.