Highlander 2WD L4-2.4L (2AZ-FE) (2001)
11. INSTALL BACK DOOR GLASS SPACER NO.1
a. Remove the damaged spacer.
b. Cut off the old adhesive around the spacer installation area.
NOTE: Be careful not to damage the body.
c. Clean the installation area.
d. Install a new spacer No.1 onto the glass.
12. INSTALL BACK WINDOW GLASS SPACER NO.2
13. INSTALL BACK WINDOW MOULDING OUTSIDE
a. Install the new back window moulding outside as shown in the illustration.
a: 2 mm (0.08 in.)
14. INSTALL BACK DOOR GLASS
a. Clean and shape contact surface of back door
1. Using a knife, cut away any rough areas on the back door.