Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-1118001.png)
Radio/Stereo: Service and Repair
RADIO RECEIVER ASSEMBLY
REPLACEMENT
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY CENTER
2. REMOVE INTEGRATION CONTROL & PANEL ASSEMBLY
a. Remove the 6 bolts.
b. Disconnect the connectors, then remove the radio receiver assembly and integration control panel.
3. REMOVE RADIO RECEIVER ASSEMBLY
a. Remove the 4 bolts, 2 screws and radio bracket No.1
b. Remove the 4 bolts, 2 screws and radio bracket No.2.
c. Remove the radio receiver assembly to the integration control panel assembly.
