toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

NHTSA04V181000 > < Recall - Child Protection Lock Modification|Page 5114
Page 9
background image

the sharp edges on the child protection lock lever.

Dimension: Approximately 1.0 mm (0.0039 in.)

NOTE:

Do not damage the door with the file or the sandpaper.

(b)

Reinstall the Rear Door Child Protection Lock Protector Cover.

6.

REPEAT STEPS 1 THROUGH 5 ON THE OTHER REAR SIDE DOOR.

VI. SSC Completion Label Installation

1.

After completing the repair and before returning the vehicle to the owner, an SSC completion label that is enclosed in the owner's notification
letter must be affixed to the left front door hinge post near the check strap.

2.

The label is to be filled out as follows:

^

Write in SSC40B.

^

Write in the date the repair was performed.

Write in your dealer code.

3.

Additional SSC completion labels, in sheets of 50 (P/N 00410-01917), may be ordered through the non-parts system on a 1450 order form or
through the TDN system.

NHTSA04V181000 > < Recall - Child Protection Lock Modification|Page 5114