Highlander 2WD V6-3.0L (1MZ-FE) (2003)
Front Fender Liner: Service and Repair
Front Fender Apron (Assembly)
FRONT FENDER APRON (ASSEMBLY)
REPLACEMENT
1. REMOVE RADIATOR UPPER SUPPORT
2. REMOVE RADIATOR SIDE SUPPORT
3. REMOVE FRONT BODY PILLAR LOWER GUSSET
4. REMOVE FRONT FENDER APRON
5. INSTALL FRONT FENDER APRON
HINT: Inspect the fitting of the front fender and hood, etc. before welding, since this affects the appearance of the finish.