Highlander 2WD V6-3.0L (1MZ-FE) (2003)
a. Pull the center pillar lower garnish upward to remove it.
13. REMOVE CENTER PILLAR GARNISH LOWER LH
14. REMOVE CENTER PILLAR GARNISH RH
a. Remove the bolt and front seat outer belt shoulder anchor.
b. Using a screwdriver, remove the center pillar upper garnish.
HINT: Tape the screwdriver tip before use.
15. REMOVE CENTER PILLAR GARNISH LH
16. REMOVE TONNEAU COVER ASSEMBLY
17. REMOVE DECK BOARD SUB-ASSEMBLY
a. Using a screwdriver, remove the 5 clips.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 bolts and deck side trim box RH.
18. REMOVE DECK BOARD SUB-ASSEMBLY NO.2
19. REMOVE DECK BOARD SUB-ASSEMBLY NO.3
20. REMOVE LUGGAGE COMPARTMENT TRAY
21. REMOVE SPARE WHEEL COVER TRAY
22. REMOVE DECK SIDE TRIM BOX RH
a. Remove the screw.
b. Using a screwdriver, remove the deck trim box.
HINT: Tape the screwdriver tip before use.