Highlander 2WD V6-3.0L (1MZ-FE) (2003)
d. Remove the bolt, nut and 2 screws.
e. Disconnect the part fit to the air conditioner radiator assy and remove the blower assy.
6. REMOVE RECIRCULATION DAMPER SERVO SUB-ASSY
a. Remove the 3 screws and recirculation damper servo sub-assy.
7. REMOVE COOLING UNIT MOTOR SUB-ASSY W/FAN
a. Remove the 3 screws and cooling unit motor servo sub-assy W/fan.
8. INSTALL BLOWER ASSY
a. Aligning the part to be fit with that of the air conditioner radiator assy, install the blower assy.
b. Install the blower assy, bolt, nut and 2 screws.
Torque: 9.8 N.m (100 kgf.cm, 87 in.lbf)