Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-1303001.png)
Center Mounted Brake Lamp: Service and Repair
CENTER STOP LAMP ASSEMBLY
REPLACEMENT
1. REMOVE BACK WINDOW PANEL TRIM UPPER
2. REMOVE CENTER STOP LAMP ASSEMBLY
a. Remove the bulb socket.
b. Remove the 2 screws.
c. Release the 4 claws and remove the center stop lamp assembly.
3. INSTALL CENTER STOP LAMP ASSEMBLY
a. Remove adhesive tape from the body.
b. Wipe off stains with a cleaner.
