Highlander 2WD V6-3.0L (1MZ-FE) (2003)
License Plate Lamp: Service and Repair
REPLACEMENT
1. REMOVE ASSIST STRAP HOLE COVER
2. REMOVE ASSIST STRAP ASSEMBLY
3. REMOVE BACK DOOR TRIM PANEL ASSEMBLY
4. REMOVE BACK DOOR LOCK ASSEMBLY
5. REMOVE BACK DOOR HANDLE ASSEMBLY OUTSIDE
6. REMOVE LUGGAGE COMPARTMENT DOOR GARNISH SUB-ASSEMBLY OUTSIDE
7. REMOVE LICENSE PLATE LAMP ASSEMBLY
a. Remove the 4 screws and 2 license plate lamp lens.
b. Remove the license plate lamp assembly to the luggage compartment door garnish sub-assembly outside.
8. INSTALL BACK DOOR LOCK ASSEMBLY