Highlander 2WD V6-3.0L (1MZ-FE) (2003)
a. Install the fuel pipe No.1 with the 2 new pulsation damper gaskets and the pulsation damper.
Torque: 33 N.m (336 kgf.cm, 24 ft.lbf)
b. Install the delivery pipe with 2 new fuel pipe No.1 gaskets and a bolt to the fuel pipe No.1.
Torque: 33 N.m (336 kgf.cm, 24 ft.lbf)
c. Install the fuel pipe No.1 to the intake manifold with a bolt.
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
12. INSTALL INTAKE AIR SURGE TANK
13. INSTALL FRONT SUSPENSION BRACE SUB-ASSY UPPER CENTER
Torque: 80 N.m (816 kgf.cm, 59 ft.lbf)
14. INSTALL AIR CLEANER ASSEMBLY WITH HOSE
15. INSTALL V-BANK COVER
16. ADD COOLANT
17. INSPECT CHECK FOR ENGINE COOLANT LEAKS
18. INSPECT FOR FUEL LEAKS