Highlander 2WD V6-3.0L (1MZ-FE) (2003)
/Page-1050004.png)
-
Use gloves and safety glasses when handling a horn button assy with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a horn button assy with the deployed airbag.
HINT: When scrapping a vehicle, deploy the airbag and scrap the vehicle with the horn button assy still installed.
Deployment When Disposing of Steering Wheel Pad
DISPOSAL
HINT: When scrapping vehicle equipped with an SRS or disposing of a horn button assy, always first deploy the airbag in accordance with the
procedure described below. If any abnormality occurs with the airbag deployment, contact the SERVICE DEPT. of the TOYOTA MOTOR SALES,
U.S.A., INC.
CAUTION:
-
Never dispose of a horn button assy which has an Undeployed airbag.
-
The airbag produces a sizeable exploding sound when it deploys, so perform the operation out-of-doors and where it will not create a nuisance to
nearby residents.
-
When deploying the airbag, always use the specified SST (SRS Airbag Deployment Tool). Perform the operation in a place away from electrical
noise.
-
When deploying an airbag, perform the operation at least 10 m (33 ft) away from the horn button assy.
-
The horn button assy is very hot when the airbag is deployed, so leave it alone for at least 30 minutes after deployment.
-
Use gloves and safety glasses when handling a horn button assy with the deployed airbag.
-
Always wash your hands with water after completing the operation.
-
Do not apply water, etc. to a horn button assy with the deployed airbag.
DISPOSE HORN BUTTON ASSY(WHEN DISPOSING OF AIRBAG ASSEMBLY DEPLOYMENT METHOD)
NOTE:
-
When disposing of the horn button assy (with airbag) only, never use the customers vehicle to deploy the airbag.
-
Be sure to follow the procedure given when deploying the airbag.
HINT: Have a battery ready as the power source to deploy the airbag.
a. Remove the horn button assy.
CAUTION: When storing the horn button assy, keep the upper surface of the pad facing upward.
b. Using a service-purpose wire harness, tie down the horn button assy to the disc wheel.
